View Latest Blog Entries
Close
Categories
Testing & Assessment Certification Aging Wires & Systems Standard & Regulation Management Maintenance & Sustainment Conference & Report Protection & Prevention Research Arcing Miscellaneous
Popular Tags
Visual Inspection MIL-HDBK MIL-HDBK-525 AS50881 FAR High Voltage Electromagnetic Interference (EMI) FAR 25.1707 AS4373 Maintenance Wire System Arcing Damage
All Tags in Alphabetical Order
25.1701 25.1703 abrasion Accelerated Aging ADMT Aging Systems AIR6808 Aircraft Power System aircraft safety Aircraft Service Life Extension Program (SLEP) altitude arc damage Arc Fault (AF) Arc Fault Circuit Breaker (AFCB) Arc Track Resistance Arcing Arcing Damage AS22759 AS22759/87 AS4373 AS4373 Method 704 AS50881 AS5692 AS6019 AS83519 AS85049 AS85485 AS85485 Wire Standard ASTM D150 ASTM F2696 ASTM F2799 ASTM F3309 ATSRAC Attenuation Automated Wire Testing System (AWTS) backshell batteries Bent Pin Analysis Best of Lectromec Best Practice bonding Cable cable testing Carbon Nanotube (CNT) Certification Chafing Chemical Testing Circuit Breaker circuit design Circuit Protection Coaxial cable cold bend collision comparative analysis Compliance Component Selection Condition Based Maintenance Conductor conductors conduit Connector connector selection connectors contacts Corona Corrosion Corrosion Preventing Compound (CPC) Cracking D-sub data analysis data cables degradat Degradation Delamination Derating design safety diagnostic Dielectric breakdown dielectric constant disinfectant Distributed Power System DO-160 dynamic cut through E-CFR Electrical Aircraft Electrical Component Electrical Power Electrical Testing Electromagnetic Interference (EMI) Electromagnetic Vulnerability (EMV) EMC EMF EN2235 EN3197 EN3475 EN6059 End of Service Life End of Year Energy Storage engines Environmental Environmental Cycling environmental stress ethernet EWIS certification EWIS Component EWIS Design EWIS Failure EWIS sustainment EWIS Thermal Management EZAP FAA FAA AC 25.27 FAA AC 25.981-1C failure conditions Failure Database Failure Modes and Effects Analysis (FMEA) FAQs FAR FAR 25.1703 FAR 25.1707 FAR 25.1709 fault tree Fixturing Flammability fleet reliability Flex Testing fluid exposure Forced Hydrolysis fuel system fuel tank ignition functional testing Fundamental Articles Future Tech galvanic corrosion Gold Gold plating Green Taxiing Grounding hand sanitizer Harness Design Hazard Analysis health monitoring heat shrink tubing high current high Frequency high speed data cable High Voltage History Hot Stamping Humidity Variation ICAs IEC60172 IEEE installation installation safety Instructions for Continued Airworthiness Insulation insulation breakdown insulation resistance insulation testing interchangeability IPC-D-620 ISO 17025 Certified Lab Kapton Laser Marking life limited parts Life prediction life projection Lightning maintainability Maintenance Maintenance costs Mandrel mean free path measurement mechanical stress Mechanical Testing MECSIP MIL-C-38999 MIL-C-85485 MIL-DTL-17 MIL-DTL-3885G MIL-DTL-38999 MIL-E-25499 MIL-HDBK MIL-HDBK-1646 MIL-HDBK-217 MIL-HDBK-454 MIL-HDBK-516 MIL-HDBK-522 MIL-HDBK-525 MIL-HDBK-683 MIL-STD-1353 MIL-STD-1560 MIL-STD-1798 MIL-STD-464 MIL-T-7928 MIL-T-81490 MIL-W-22759/87 MIL-W-5088 Military 5088 MIL–STD–5088 modeling MS3320 NASA NEMA27500 Nickel nickel plating No Fault Found off gassing Outgassing Overheating of Wire Harness Parallel Arcing part selection Partial Discharge partial discharge at altitude Performance physical hazard assessment Physical Testing polyimdie Polyimide-PTFE Power over Ethernet power system Power systems predictive maintenance Presentation Probability of Failure Product Quality pull through Radiation Red Plague Corrosion Reduction of Hazardous Substances (RoHS) regulations relays Reliability Research Resistance Rewiring Project Risk Assessment SAE Sanitizing Fluids Secondary Harness Protection Separation Requirements Series Arcing Service Life Extension Severe Wind and Moisture-Prone (SWAMP) Severity of Failure Shield Shielding signal cable silver plated wire skin depth skin effect Small aircraft smoke Solid State Circuit Breaker Space Certified Wires Splice standards stored energy supportability Sustainment Temperature Rating Temperature Variation Test methods Test Pricing Testing Thermal Circuit Breaker Thermal Endurance Thermal Index Thermal Shock Thermal Testing tin Tin plated conductors tin plating tin solder tin whiskering tin whiskers Troubleshooting TWA800 UAVs USAF verification Visual Inspection voltage voltage differential Voltage Tolerance white paper whitelisting Wire Ampacity Wire Certification Wire Comparison wire damage wire failure wire performance wire properties Wire System wire testing Wire Verification wiring components work unit code

SAE

An Introduction to AS50881

For the last 17 years, Lectromec publications have discussed items related to the aerospace wiring installation standard AS50881. The standard is often referenced in many of our articles, but Lectromec has never really talked about what this standard is, why it should be used, who should use the standard, and what should be considered when the standard is employed.

To remedy this oversight, this article seeks to address the question many come to ask when approaching EWIS: why should I care about AS50881?

Read more

SAE Wire and Cable Committee Meeting Update – Fall 2019

The SAE wire and cable committee held their fall 2019 meeting in San Diego this year. As with every committee meeting, a lot of technical areas were discussed, progress was made, and some new ideas/problems are emerged. As we do after all these meetings, we put together a highlight of some of the talking points from the meeting.

Read more

Latest Developments in Wire and Cable (Spring 2019)

Wire and cable standards are never proactive, but reactive to industry needs, and as the aviation world moves to high power systems, wire and cable must catch up to ensure the products are available for long reliable service life. Twice a year the SAE wire/cable community comes together to slowly push the standards and industry guidance forward; this year, New Orleans was the setting.

During this three-day meeting, several topics were discussed impacting the next generation of aircraft designs. Here, we cover a couple of these developments.

Read more

Latest Developments in Wire and Cable – SAE 8A 8D Spring 2018

It is not often that you find more than two people in a room with a passion for aerospace wiring systems. One of the exceptions is the bi-yearly gathering of wiring system component and EWIS experts for the SAE 8A/8D committee. Last week, Chicago, Illinois was the host for this event that covered a wide […] Read more

Fall 2017 SAE Wire and Cable Meeting Update

Every six months, the SAE wire system installation and wire/cable subcommittees come together to advance the state of the industry. This year, the Fall meeting was held in sunny Temecula, California. The following are some of the noteworthy items from this meeting. High Voltage Endurance The 8D task group on the evaluation of high voltage […] Read more

Developments in High-Voltage

The first meeting of the 8A and 8D committees for 2017 was held in Kissimmee Florida in April 2017. There were several topics discussed and voted upon that will have an impact on future wire component and system designs (previous article on SAE 8A/8D committee meeting available here). One common theme in the meeting was […] Read more