View Latest Blog Entries
Close
Categories
Testing & Assessment Certification Aging Wires & Systems Standard & Regulation Management Maintenance & Sustainment Conference & Report Protection & Prevention Research Arcing Miscellaneous
Popular Tags
Visual Inspection MIL-HDBK MIL-HDBK-525 AS50881 FAR High Voltage Electromagnetic Interference (EMI) FAR 25.1707 AS4373 Maintenance Wire System Arcing Damage
All Tags in Alphabetical Order
25.1701 25.1703 abrasion Accelerated Aging ADMT Aging Systems AIR6808 Aircraft Power System aircraft safety Aircraft Service Life Extension Program (SLEP) altitude arc damage Arc Fault (AF) Arc Fault Circuit Breaker (AFCB) Arc Track Resistance Arcing Arcing Damage AS22759 AS22759/87 AS4373 AS4373 Method 704 AS50881 AS5692 AS6019 AS83519 AS85049 AS85485 AS85485 Wire Standard ASTM D150 ASTM F2696 ASTM F2799 ASTM F3309 ATSRAC Attenuation Automated Wire Testing System (AWTS) backshell batteries Bent Pin Analysis Best of Lectromec Best Practice bonding Cable cable testing Carbon Nanotube (CNT) Certification Chafing Chemical Testing Circuit Breaker circuit design Circuit Protection Coaxial cable cold bend collision comparative analysis Compliance Component Selection Condition Based Maintenance Conductor conductors conduit Connector connector selection connectors contacts Corona Corrosion Corrosion Preventing Compound (CPC) Cracking D-sub data analysis data cables degradat Degradation Delamination Derating design safety diagnostic Dielectric breakdown dielectric constant disinfectant Distributed Power System DO-160 dynamic cut through E-CFR Electrical Aircraft Electrical Component Electrical Power Electrical Testing Electromagnetic Interference (EMI) Electromagnetic Vulnerability (EMV) EMC EMF EN2235 EN3197 EN3475 EN6059 End of Service Life End of Year Energy Storage engines Environmental Environmental Cycling environmental stress ethernet EWIS certification EWIS Component EWIS Design EWIS Failure EWIS sustainment EWIS Thermal Management EZAP FAA FAA AC 25.27 FAA AC 25.981-1C failure conditions Failure Database Failure Modes and Effects Analysis (FMEA) FAQs FAR FAR 25.1703 FAR 25.1707 FAR 25.1709 fault tree Fixturing Flammability fleet reliability Flex Testing fluid exposure Forced Hydrolysis fuel system fuel tank ignition functional testing Fundamental Articles Future Tech galvanic corrosion Gold Gold plating Green Taxiing Grounding hand sanitizer Harness Design Hazard Analysis health monitoring heat shrink tubing high current high Frequency high speed data cable High Voltage History Hot Stamping Humidity Variation ICAs IEC60172 IEEE installation installation safety Instructions for Continued Airworthiness Insulation insulation breakdown insulation resistance insulation testing interchangeability IPC-D-620 ISO 17025 Certified Lab Kapton Laser Marking life limited parts Life prediction life projection Lightning maintainability Maintenance Maintenance costs Mandrel mean free path measurement mechanical stress Mechanical Testing MECSIP MIL-C-38999 MIL-C-85485 MIL-DTL-17 MIL-DTL-3885G MIL-DTL-38999 MIL-E-25499 MIL-HDBK MIL-HDBK-1646 MIL-HDBK-217 MIL-HDBK-454 MIL-HDBK-516 MIL-HDBK-522 MIL-HDBK-525 MIL-HDBK-683 MIL-STD-1353 MIL-STD-1560 MIL-STD-1798 MIL-STD-464 MIL-T-7928 MIL-T-81490 MIL-W-22759/87 MIL-W-5088 Military 5088 MIL–STD–5088 modeling MS3320 NASA NEMA27500 Nickel nickel plating No Fault Found off gassing Outgassing Overheating of Wire Harness Parallel Arcing part selection Partial Discharge partial discharge at altitude Performance physical hazard assessment Physical Testing polyimdie Polyimide-PTFE Power over Ethernet power system Power systems predictive maintenance Presentation Probability of Failure Product Quality pull through Radiation Red Plague Corrosion Reduction of Hazardous Substances (RoHS) regulations relays Reliability Research Resistance Rewiring Project Risk Assessment SAE Sanitizing Fluids Secondary Harness Protection Separation Requirements Series Arcing Service Life Extension Severe Wind and Moisture-Prone (SWAMP) Severity of Failure Shield Shielding signal cable silver plated wire skin depth skin effect Small aircraft smoke Solid State Circuit Breaker Space Certified Wires Splice standards stored energy supportability Sustainment Temperature Rating Temperature Variation Test methods Test Pricing Testing Thermal Circuit Breaker Thermal Endurance Thermal Index Thermal Shock Thermal Testing tin Tin plated conductors tin plating tin solder tin whiskering tin whiskers Troubleshooting TWA800 UAVs USAF verification Visual Inspection voltage voltage differential Voltage Tolerance white paper whitelisting Wire Ampacity Wire Certification Wire Comparison wire damage wire failure wire performance wire properties Wire System wire testing Wire Verification wiring components work unit code

EZAP

FAQs of EWIS Service Life Extension Programs

Lectromec has accumulated a set of frequently asked questions related to wire system sustainment. Here, we cover several high level questions about the assessment and its value and the subsequent article we will delve into some of the more technical details. Read more

Correcting Bad Wire System Guidance

Consider a common aircraft wire: how many requirements and standards must be considered during its design and fabrication? A simple back-of-the-envelope calculation suggests at least 30 various requirements and standards. For an aircraft wire harness, that number can easily jump to 50. Without a doubt, between each of these standards and requirements, there can be […] Read more

Updating Periodic Maintenance Procedures

An area of aircraft maintenance and wire system sustainment which has been around for the last decade is the enhanced zonal analysis procedures, or EZAP for short. EZAP is a set of procedures developed by the FAA during the 2000s detailing a systematic process for handling of wiring system maintenance based on zones. Lectromec has […] Read more

Can the EWIS be Safe After a Modification?

The days of ‘fit and forget’ EWIS are at least a decade behind, the aircraft industry’s understanding of the implications of wiring as a system continues to evolve. New aircraft have gone through EWIS evaluations to ensure that the EWIS complies to regulations – not an easy task. Obviously, as the OEM design choices remain […] Read more

Meeting Requirements for EWIS Certification

There are more than 17 parts to the FAA’s Electrical Wiring Interconnection System (EWIS) regulations enumerated in the 25.1700 series. To show compliance with each of these regulations require a thorough subject area understanding. More so, as the EWIS evolves in design, it becomes clear that achieving EWIS certification requires a lot of data. If […] Read more