Connector Contact Retention
FOR: Connector From $610; some methods require a quoteAvailable connector contact retention methods for standards including EIA-364, MIL-DTL-26482, MIL-DTL-38999 and others and samples such as Connector.
For connectors, it is imperative that contact does not release when placed under the normal and dynamic stresses of operation. Furthermore, once engaged in a connector, the contact (pin or socket) should hold firm under simple tugging that may occur during installation or maintenance actions.
This test examines the axial force necessary to displace a contact from the proper location when inserted into a connector. The pass/fail criteria of the sample are based on the particular specification.
As the number of test trials is dependent on the number of connector contacts, the price per test may change based on the number of trials to be performed.
Choose the exact method
Pricing and sample requirements vary by test method. Specific test requirements can be added on the request quote page. Final scope and pricing are confirmed by Lectromec usually within 24 hours.
Contact Retention for Electrical Connectors
EIA-364 · 29
- Sample type
- Connector
Insert Retention
EIA-364 · 35
- Sample type
- Connector
Contact Retention
EIA-364 · 38
- Sample type
- Connector
Contact Retention
MIL-DTL-26482 · 4.6.32
- Sample type
- Connector
- Specimens per test
- 6
Insert Retention
MIL-DTL-38999 · 4.5.12
- Sample type
- Connector
Insert Retention
MIL-DTL-83733 · 4.7.7
- Sample type
- Connector
Center Contact Retention
MIL-PRF-39012 · 4.6.9
- Sample type
- Connector
Catalog data generated from Lectromec's controlled Box workbook, version
2655261484000. Internal and external lab-source information
is intentionally excluded from this public page.